Signs You May Need a New Water Heater
Some water heater problems can be repaired. Others may make replacement the more practical long-term choice. Age, tank condition, recurring repairs, hot water demand, and efficiency can all help determine whether it makes sense to install a new water heater.
Your Water Heater Is Getting Older
As a tank water heater ages, corrosion, sediment buildup, and worn components can make repairs more frequent. The condition of the unit matters as much as its age when deciding whether to repair or replace it.
The Water Heater Tank Is Leaking
Water coming from the tank itself can indicate internal corrosion or tank failure. A plumber can determine whether the leak is coming from a repairable connection or from the tank body.
You're Adding a Bathroom or Living Space
A new bathroom, ADU, laundry area, or other addition can increase hot water demand. Your existing water heater may need to be resized or replaced to serve the expanded property.
Your Water Heating Costs Are Increasing
An aging or inefficient water heater may require more energy to deliver the hot water your household needs. Replacement can also provide an opportunity to consider a more efficient system.
You Keep Running Out of Hot Water
If hot water consistently runs out during normal household use, the existing unit may be undersized, losing performance, or no longer meeting your family's current hot water demand.
The Unit Needs Repeated Repairs
Recurring problems can make continued repairs less practical. We can compare the condition and repair needs of your existing unit with the cost and benefits of installing a new water heater.
What Goes Into a Proper Water Heater Installation?
A good water heater installation starts before the new unit is connected. Kojaack Plumbing Solutions evaluates your property's hot water demand, available space, existing plumbing, fuel or electrical requirements, and the type of water heater that makes sense for the property.
Proper Water Heater Sizing Comes First
A water heater should be sized around the people and fixtures it needs to serve rather than automatically replacing the old unit with an identical size. Bathrooms, showers, appliances, household size, and typical periods of high hot water use can all affect the amount of capacity you need.
For tank water heaters, that means selecting appropriate storage capacity and recovery performance. Tankless water heaters are sized differently and must be able to provide the necessary flow while producing the required temperature rise.
Tank and Tankless Water Heaters Serve Different Needs
Traditional tank water heaters store a supply of heated water and remain a practical choice for many homes. Tankless water heaters heat water as it is needed and can reduce the amount of space devoted to water heating.
Neither type is automatically the right choice for every property. Available utilities, hot water demand, installation requirements, space, budget, and long-term plans should all be considered before choosing between a tank and tankless water heater.
Gas and Electric Water Heater Installation
The existing energy source can affect both the equipment and installation requirements. Gas water heaters require proper gas supply, combustion air, and venting, while electric systems must have the appropriate electrical service for the equipment being installed.
Changing water heater types or energy sources can require additional modifications, which is why evaluating the existing setup is an important part of planning the installation.
Code-Compliant Installation Matters
Water heater installation involves more than connecting hot and cold water lines. Depending on the system and property, installation requirements can involve venting, gas connections, electrical connections, temperature and pressure relief components, expansion control, drainage, seismic protection, and other applicable plumbing and safety requirements.
Kojaack Plumbing Solutions installs water heaters according to applicable requirements and handles permitting when required for the project.
Replacing and Removing the Existing Water Heater
When we're replacing an existing water heater, the old unit must be safely disconnected and drained before the new system can be installed. The existing connections and installation area are also evaluated so problems can be addressed before the replacement unit is put into service.
Removal and disposal of the existing unit can be included as part of the replacement installation so you aren't left dealing with an old water heater after the project is complete.
What to Expect From Water Heater Installation
Evaluate Your Hot Water Needs
We review the existing system, available installation space, household or property demand, and the utilities available for the new water heater.
Choose the Right System
We explain appropriate tank or tankless options, sizing considerations, installation requirements, and the scope of work before installation begins.
Install the Water Heater
We remove the existing unit when applicable, make the necessary plumbing and utility connections, install the new water heater, and complete required installation components.
Test and Walk Through the System
After installation, we test the system for proper operation and review the new water heater with you, including basic operation and maintenance considerations.
Local Water Heater Installation From Licensed Plumbing Professionals
Honest Recommendations
We help you choose a water heater based on your property's actual hot water needs rather than automatically recommending the largest or most expensive system.
Clear Communication
You'll understand the recommended system, installation requirements, and scope of work before the new water heater is installed.
Respect for Your Property
We work carefully around your home or business, protect the work area, and clean up after the installation is complete.
Licensed Experience
PL01 commercial license and over a decade in the plumbing trade.
Water Heater Installation Throughout Marysville & Snohomish County
Kojaack Plumbing Solutions provides professional water heater installation for homes and businesses in Marysville and communities throughout Snohomish County.
Our service area includes Marysville, Everett, Lake Stevens, Arlington, Snohomish, Mill Creek, Mukilteo, Lynnwood, Edmonds, Mountlake Terrace, Brier, Monroe, Granite Falls, Stanwood, Sultan, Gold Bar, Darrington, Smokey Point, Tulalip, and surrounding communities within our service area.
Whether you're replacing an aging tank, need more hot water capacity, are adding a new space, or are considering a tankless water heater, Kojaack Plumbing Solutions can help you determine the right system for your property.
Call (425) 725-7635 or contact Kojaack Plumbing Solutions to request an estimate for water heater installation.
Water Heater Installation Questions & Answers
The decision depends on the age and condition of the water heater, where it is leaking, the type and cost of the repair, its performance, and whether problems have become recurring. We can evaluate the existing unit and explain whether repair or replacement makes more sense.
Water heater sizing depends on household or property hot water demand, the number of people and fixtures being served, typical periods of simultaneous use, and the type of system being installed. Tank and tankless water heaters are also sized differently.
Both can be good choices. Tank water heaters provide stored hot water and work well for many properties. Tankless systems heat water as it is needed and use less installation space. The right choice depends on hot water demand, available utilities, installation requirements, space, budget, and your long-term plans.
Water heater installations can involve gas or electric equipment depending on the property and selected system. The existing utility setup and the requirements of the new equipment need to be evaluated before installation.
In many properties, converting from a tank to a tankless water heater is possible, but the installation may require changes to gas service, electrical service, venting, plumbing, or the installation location. We evaluate those requirements before recommending a conversion.
No. Some leaks come from connections or components that may be repairable. A leak originating from a deteriorated tank is different and may require replacement. Identifying exactly where the water is coming from is the first step.
Removal and disposal of the existing water heater can be included as part of a replacement installation. We disconnect and drain the old unit as necessary before installing the replacement system.
Yes. Kojaack Plumbing Solutions is based in Marysville and provides water heater installation for homes and businesses throughout Snohomish County and surrounding communities within our service area.